Flashing & Vapor Barriers

Below are some common products that we carry.  If you need other products, let us know, and we'll get it for you.

COPPER FABRIC FLASHING

For close to 100 years Copper Fabric Flashing has proven itself as a long lasting dependable thru-wall flashing.  The two layers of dense glass fabric and a special blended asphalt are laminated to the copper core to produce greater tensile strength and improve puncture resistance.  The composition of copper, glass fabric and asphalt will ensure a permanent bond in the mortar join and protection from moisture.

Copper Fabric is manufactured from a full sheet of 2, 3, 5, or 7oz copper bonded on both sides to glass fabric with an asphaltic adhesive.

Size: Rolls 36" wide x 25' long. Will slit to multiple widths.

Click  Copper Fabric Flashing for more information.

WATERPROOFING MEMBRANES - MOISTSEAL

Moistseal is a polyvinyl chloride sheet available in 10, 20, 30 and 60 mils. It will show no cracking or flaking when bent through 180 degrees over a 1/32" mandrel and then bent at the same point over the same size mandrel in the opposite direction through 360 degrees. The material conforms to A.S.T.M. Standards D-822 for at least 400 hours. Strict quality control assures full weight and uniform thickness.

Note: Moistseal, and any other PVC membranes, are not recommended for thru-wall masonry flashing by Advanced Building Products, Inc. or the Brick Institute of America.

Click Moistseal for more information.

AQUA FLASHING 500

Aqua Flash 500 flashing is a composite sheet type waterproofing membrane consisting of 8 mils of high density cross laminated polyethylene bonded to 32 mils of rubberized asphalt for a total thickness of 40 mils.

Click Aqua Flashing 500 for more information.